Needle Bearing CF5

Needle Bearing CF5
Product Introduction:
The CF5 needle roller bearing is a specialized stud-type cam follower engineered for precision motion guidance and space-constrained mechanical assemblies. It integrates a sturdy mounting stud with high-load needle roller technology to deliver smooth operational movement, dependable radial load capacity, and straightforward mechanical integration.
Send Inquiry
Description
Technical Parameters

CF5 Chrome Steel Cam Follower for Demanding Mechanical Motion

In a cam-driven machine, the follower is one of the components repeatedly exposed to concentrated mechanical loads. Every cycle brings another rolling contact between the follower and the cam or track.

For this type of application, material selection matters.

The CF5 needle bearing cam follower is manufactured from Chrome Steel GCr15, a bearing steel widely used for rolling-element components where hardness, wear resistance, and consistent raceway performance are important.

Rather than treating the cam follower as a simple replacement part, OEM engineers generally need to look at the complete working condition: load, running cycle, contact surface, speed, and mounting arrangement.

CF5 is designed for applications where a compact rolling follower is required to transfer motion between a rotating or reciprocating cam and the machine mechanism.


 

Why GCr15 Chrome Steel Is Used for Rolling Components

GCr15 is a high-carbon chromium bearing steel commonly used for bearing rings and rolling elements.

Its popularity in bearing manufacturing comes from its ability to achieve the hardness and structural properties required for repeated rolling contact after appropriate heat treatment.

For a cam follower, this is particularly relevant because the outer ring and internal rolling elements experience repeated contact stress during operation.

GCr15 Characteristic Relevance to Cam Followers
High hardness after heat treatment Supports repeated rolling contact
Good wear resistance Helps withstand continuous cycling
Fatigue resistance Important under repeated loading
Stable material properties Useful for consistent production
Established bearing material Widely understood in industrial supply chains

The material itself does not determine service life. Heat treatment, raceway quality, manufacturing accuracy, lubrication, load, and operating conditions all contribute to actual performance.


 

CF5 Construction at a Glance

CF5 is built around the basic principle of a rolling follower: the outer ring becomes the contact surface between the internal bearing mechanism and the cam or track.

Item Specification
Model CF5
Product Type Needle Bearing Cam Follower
Rolling Element Needle Rollers
Main Material Chrome Steel
Steel Grade GCr15
Bearing Type Track / Cam Follower
Motion Rolling Contact
Typical Loading Radial / Contact Loading
Application Cam and Guide Mechanisms

Final dimensional, load and speed specifications should be confirmed against the supplier's technical drawing for the required CF5 configuration.


 

GCr15 and Repeated Contact Stress

A cam follower can experience thousands of repeated load cycles during normal machine operation.

The loading pattern may change continuously as the follower travels through different sections of a cam profile.

At one point, the follower may experience moderate loading. During another part of the cycle, acceleration or a change in cam geometry can produce a significantly higher contact load.

This is where the material and heat-treatment condition of the rolling components become important.

A suitable Chrome Steel GCr15 construction provides a proven material base for components exposed to repeated rolling contact.


 

Load Conditions That Deserve Attention

When purchasing a cam follower, the maximum load is often more useful than the nominal working load.

For example, a machine may operate at a relatively low average load but generate higher forces during:

rapid acceleration

sudden deceleration

mechanical indexing

changes in cam radius

machine start-up

intermittent impact

Operating Condition Potential Effect
Continuous rolling Repeated fatigue loading
High acceleration Increased dynamic force
Shock loading Higher peak contact stress
Small cam radius Greater local loading
Misalignment Uneven contact

For high-cycle applications, these factors should be included in the engineering review before selecting CF5.


 

Choosing CF5 for Replacement Parts

Replacement purchasing can be more complicated than ordering bearings for a new machine.

An existing machine may have been operating for years, and the original part number may no longer provide enough information.

Before approving CF5 as a replacement, compare:

Check What to Confirm
Overall dimensions Match existing component
Mounting arrangement Confirm mechanical connection
Material GCr15 Chrome Steel
Track contact diameter Match cam or guide
Load Compare actual operating condition
Speed / cycle rate Check working range

When dimensions alone are not enough, a drawing or sample can help avoid an incorrect substitution.


 

How to Improve Consistency in Bulk Orders

For distributors and machine builders purchasing cam followers repeatedly, consistency between batches is important.

A practical approach is to establish an approved specification covering:

model

dimensions

material

clearance

lubrication

packaging

inspection requirements

Once approved, the same specification can be used for future purchase orders.

This reduces the possibility of receiving nominally identical components with different manufacturing characteristics.


 

CF5 in a Complete Cam Mechanism

The follower is only one part of the system.

A reliable cam mechanism usually depends on the relationship between:

Cam profile + track material + follower + mounting structure + lubrication

Changing one component can affect the others.

For example, increasing machine speed without reviewing lubrication and contact conditions may create a problem that cannot be solved simply by selecting a different bearing.

This system-level approach is especially important for OEM machinery designed for continuous production.


 

CF5 as a GCr15 Chrome Steel Rolling-Follower Solution

For a cam follower, material selection is closely connected with the way the component works.

CF5 uses GCr15 Chrome Steel for a rolling-contact application in which the follower repeatedly interacts with a cam or track. The material provides a well-established basis for producing hardened bearing components with the properties required for demanding mechanical contact.

For OEM manufacturers and industrial distributors, the most useful approach is to specify the complete component rather than the steel grade alone: dimensions, internal construction, operating conditions, lubrication, and quality requirements should all be agreed before production.

 

Product Picture

Needle-Bearing-CF5.jpg

Needle-Bearing-Cam-Follower-CF5.jpg

Cam-Follower-CF5.jpg

 

Hot Tags: needle bearing cf5, China needle bearing cf5 manufacturers, factory, 8mm bearing shaft, stainless steel linear bearings, double row full complement cylindrical roller bearings, 8mm od bearing, 20mm linear bearing block, ball bearing reel

Send Inquiry