Hot Sale 608ZZ 608 608Z Bearing 8X22X7MM

Hot Sale 608ZZ 608 608Z Bearing 8X22X7MM
Product Introduction:
The 608ZZ is a single-row deep groove ball bearing with an 8 mm bore, 22 mm outside diameter, and 7 mm width. It features double metal shields to help retain factory-applied grease and reduce the entry of dust and other contaminants.
Send Inquiry
Description
Technical Parameters

608ZZ Deep Groove Ball Bearing

8×22×7 mm Double-Shielded Ball Bearing for Compact Rotating Equipment

For machinery designers and maintenance buyers, bearing selection is often influenced by installation space, speed requirements, and environmental conditions as much as by load capacity.

When equipment requires a compact rotating assembly with reliable performance and easy replacement, the 608ZZ deep groove ball bearing provides a practical solution for a wide range of compact applications.

The 608ZZ is a single-row deep groove ball bearing with an 8 mm bore, 22 mm outside diameter, and 7 mm width. It features double metal shields to help retain factory-applied grease and reduce the entry of dust and other contaminants. Chrome steel is available for general applications, with carbon steel and stainless steel material options available according to application and sourcing requirements. The standardized 8×22×7 mm size supports straightforward installation and replacement in compact rotating equipment.

For industrial distributors, OEM manufacturers, and maintenance suppliers, the 608ZZ offers a standardized bearing unit that simplifies installation and replacement processes with supply capacity up to 100,000 pcs/month.


 

Understanding the 608ZZ Bearing Structure

Unlike open bearings that expose internal components to the environment, the 608ZZ uses non-contact metal shields on both sides to help retain lubrication and reduce contamination exposure.

The single-row deep groove design provides radial load capacity while accommodating axial loads in both directions, making it suitable for a wide range of rotating applications.

Component Function
Deep Groove Raceway Provides radial load capacity while accommodating axial loads in both directions
Double Metal Shields (ZZ) Non-contact metal shields on both sides help retain internal lubrication and reduce exposure to dust and external contaminants
Chrome Steel Rings and Balls Standard material for general applications with good wear resistance and fatigue life
Pressed Steel Cage Maintains ball spacing and prevents contact between balls
Factory-Applied Grease Pre-lubricated for life under normal operating conditions

This structure makes the 608ZZ suitable for compact machinery, small rotating mechanisms, auxiliary fans, rollers, and other equipment using an 8×22×7 mm bearing envelope.


 

608ZZ Product Specifications

 

Parameter Specification
Model 608ZZ
Alternative Designations 608, 608Z
Bearing Type Deep Groove Ball Bearing
Row Configuration Single Row
Bore Diameter (d) 8 mm
Outside Diameter (D) 22 mm
Width (B) 7 mm
Standard Material Chrome Steel
Material Options Carbon Steel / Chrome Steel / Stainless Steel
Precision Grade P0
Shield / Seal Options Open / 2RS / ZZ
Internal Clearance C0 / C2 / C3
Vibration & Noise Grade Z1V1 / Z2V2
OEM Service Available
Supply Capacity Up to 100,000 pcs/month

 

Performance Data

Performance data for the 608ZZ deep groove ball bearing is provided below for reference during selection and replacement.

Parameter Value
Dynamic Load Rating (Cr) 3.3 kN – 4.1 kN (depending on manufacturer)
Static Load Rating (C0r) 1.35 kN – 1.4 kN
Limiting Speed (Grease) 34,000 rpm
Limiting Speed (Oil) 40,000 rpm
Working Temperature Range -25°C to +120°C (standard)
Weight Approximately 10 g

Actual performance may vary depending on material, lubrication, mounting, and operating conditions. The data above is based on standard chrome steel construction.


 

Why Buyers Choose 608ZZ Instead of Other Bearing Configurations

The choice between different 608 bearing configurations usually depends on the operating environment and lubrication requirements.

Installation Requirement Recommended Configuration
General protection from dust and contaminants 608ZZ (double metal shields)
One-side protection available 608Z (single metal shield)
Enhanced protection from moisture and fine particles 608-2RS (double rubber seals)
Open access for relubrication 608 Open
High-speed operation with minimal friction 608ZZ (non-contact shields)

The ZZ configuration is especially suitable when a balance between contamination protection and low friction is required for high-speed operation.


 

Installation Advantages for Machine Builders

For OEM equipment manufacturers, installation efficiency and standardized dimensions can influence overall production time.

The 608ZZ provides several practical design benefits:

Design Consideration 608ZZ Advantage
Standardized mounting envelope 8×22×7 mm configuration provides a defined dimensional reference for equipment integration
Contamination protection Double metal shields help retain lubrication and reduce exposure to external contaminants
High-speed capability Non-contact shields enable limiting speeds up to 34,000 rpm with grease lubrication
Combined load support Deep groove design accommodates radial and axial loads in both directions
Ready availability Standardized configuration simplifies replacement and reduces downtime
Material flexibility Chrome steel, carbon steel, and stainless steel options available

The standardized 8×22×7 mm envelope allows engineers to integrate the 608ZZ into various compact machine designs without custom bearing development.


 

Key Dimensions Buyers Should Confirm Before Ordering

Incorrect dimension matching is one of the most common causes of bearing replacement problems.

Before purchase, buyers should verify:

Confirmation Item Reason
Bore Diameter (d) Match shaft diameter - 8 mm
Outside Diameter (D) Ensure housing compatibility - 22 mm
Width (B) Confirm installation space - 7 mm
Shield / Seal Type ZZ, 2RS, Z, or Open per operating environment
Material Chrome steel, carbon steel, or stainless steel per application
Internal Clearance C0, C2, or C3 per operating conditions
Load Rating (Cr / C0r) Match operating load conditions
Limiting Speed Check application speed suitability (up to 34,000 rpm grease)

For replacement projects, comparing the existing bearing with the complete assembly is recommended.


 

608ZZ Compared With Similar Bearing Configurations

Different 608 bearing configurations serve different equipment requirements.

Model Shield / Seal Configuration Typical Use
608ZZ Double metal shields (non-contact) General applications with dust exposure, high-speed operation
608Z Single metal shield Applications requiring one-side accessibility
608-2RS Double rubber seals (contact) Moisture, fine particle, and washdown environments
608 Open No shields or seals Applications with external lubrication supply
608-2RSH Double rubber seals, heavy-duty Enhanced sealing and protection

The correct choice depends mainly on the operating environment and lubrication requirements.


 

Applications Where 608ZZ Is Commonly Selected

The 608ZZ is used in many compact mechanical assemblies requiring reliable rotating performance.

Equipment Type Application
Compact Machinery Small rotating mechanisms, auxiliary fans, rollers, and other equipment using an 8×22×7 mm bearing envelope
Automation Equipment Selected automation mechanisms, positioning components, and light-duty rotating assemblies
Wheel & Motion Systems Compact wheel assemblies, motion-transfer mechanisms, and equipment requiring a standardized deep groove ball bearing
General Industrial Equipment General-purpose rotating applications where compact dimensions, stable operation, and readily available replacement configurations are required
Skateboards and Inline Skates Wheel bearing applications (when specified for the application)
Small Electric Motors Motor shaft support in compact motor assemblies

The final bearing selection should always consider load, speed, environment, and maintenance requirements.


 

Manufacturing Process & Quality Control

The 608ZZ is manufactured through a controlled process to ensure consistent quality and performance.

Process Stage Description
Material Inspection Incoming bearing materials and components are checked according to applicable material, dimensional, and production requirements before entering the manufacturing process.
Precision Machining Bearing components are processed through controlled manufacturing operations to maintain the required dimensional accuracy and consistency of the 8×22×7 mm configuration.
Dimensional Inspection Critical dimensions and finished bearing geometry are inspected to verify conformity with specified product requirements.
Assembly Inspection Finished bearings are checked for assembly condition, rotational smoothness, appearance, and other applicable quality requirements before packaging.

Quality Control: Material and work-in-process components are subject to inspection based on product specifications, including dimensional, visual, hardness, and process-related requirements where applicable. Finished bearings are evaluated for dimensional conformity, running condition, vibration, and appearance before packaging.

Quality documentation includes ISO 9001 certification and applicable product compliance documentation according to order requirements.


 

FAQ

What is the 608ZZ bearing?

The 608ZZ is a single-row deep groove ball bearing with an 8 mm bore, 22 mm outside diameter, and 7 mm width, featuring double metal shields to retain grease and reduce contaminant entry.


What are the dimensions of the 608ZZ bearing?

The 608ZZ measures 8 mm bore × 22 mm outside diameter × 7 mm width.


What is the difference between 608ZZ and 608Z?

608ZZ has metal shields on both sides, while 608Z has a metal shield on only one side.


What is the difference between 608ZZ and 608-2RS?

608ZZ uses non-contact metal shields, suitable for high-speed operation. 608-2RS uses contact rubber seals, providing enhanced protection against moisture and fine particles but with higher friction.


What is the load rating of the 608ZZ bearing?

Dynamic load rating is approximately 3.3 kN to 4.1 kN, and static load rating is approximately 1.35 kN to 1.4 kN, depending on the manufacturer and material.


What is the limiting speed of the 608ZZ bearing?

The limiting speed is up to 34,000 rpm with grease lubrication and up to 40,000 rpm with oil lubrication.


What material is the 608ZZ bearing made of?

Chrome steel is the standard material. Carbon steel and stainless steel options are also available according to application and sourcing requirements.


Can the 608ZZ be customized?

Yes. Material, shield/seal type, internal clearance, and precision grade can be specified according to requirements. OEM service is available.


What information is needed for quotation?

Buyers should provide model number, quantity, shield/seal requirement, material preference, application details, and any special specifications.


608ZZ Deep Groove Ball Bearing for Compact Rotating Solutions

When machine design requires a compact rotating assembly with reliable performance and easy replacement, the 608ZZ deep groove ball bearing provides a practical solution for a wide range of compact applications.

The 608ZZ combines a single-row deep groove design with double metal shields and a standardized 8×22×7 mm envelope, making it suitable for compact machinery, automation equipment, wheel and motion systems, and OEM applications.

For global distributors and machinery manufacturers, reliable quality, consistent supply, and flexible purchasing options are key factors in long-term cooperation.

 

product-1-1

 

Hot Tags: hot sale 608zz 608 608z bearing 8x22x7mm, China hot sale 608zz 608 608z bearing 8x22x7mm manufacturers, factory, stainless steel ball bearing, bridge bearing, miniature cylindrical roller bearings, roller bearing with bolt, skiff ceramic bearings, 2 inch roller bearing

Send Inquiry