High Precision Needle Roller Bearings TA3220

High Precision Needle Roller Bearings TA3220
Product Introduction:
Type:Needle bearings
Industries:machines
Bore size:30 - 35 mm
Size:32*42*20mm
Model Number:TA3220
Precision Rating:P0 P6 P5 P4 P2
Lubrication:grease
Place of Origin:Zhejiang, China

Material of bearing:chrome steel GCR15
Send Inquiry
Description
Technical Parameters

Needle Roller Bearing TA3220

Compact Bearing for 32 mm Shaft Applications

The TA3220 needle roller bearing is a drawn cup bearing with a 32 mm bore, 42 mm outside diameter and 20 mm width.

Its thin outer shell and needle roller design make it useful when there is not much space around the shaft. Instead of using a larger bearing with a similar bore, a needle roller bearing can provide a practical way to support radial loads while keeping the overall assembly compact.

For replacement buyers, TA3220 is also a straightforward size to check. If your existing bearing is marked TA3220, the first dimensions to confirm are the 32 mm shaft size, 42 mm housing bore and 20 mm bearing width.

 

TA3220 Specifications

 

Item Specification
Product Name Needle Roller Bearing TA3220
Bearing Type Drawn Cup Needle Roller Bearing
Model TA3220
Bore Diameter 32 mm
Outer Diameter 42 mm
Width 20 mm
Material Bearing Steel / GCr15 Equivalent
Roller Type Needle Rollers
Cage Steel Cage
Structure Thin-Wall Drawn Cup
Lubrication Oil or Grease
Precision Grade P0 / P6 / P5
Basic Dynamic Load Rating* Approx. 25.4 kN
Basic Static Load Rating* Approx. 38.6 kN
Allowable Speed* Approx. 11,000 rpm
Reference Weight* Approx. 57.5 g
Inner Ring Not included as standard
OEM Service Available

*Load ratings, speed and weight are reference values and may vary with the exact bearing version and manufacturer specification. Public TA3220Z catalog data lists 25.4 kN dynamic load, 38.6 kN static load and 11,000 rpm allowable speed. (Scribd)

 

32 × 42 × 20 mm - What These Numbers Mean

 

For purchasing and replacement work, the three dimensions are easy to remember:

32 mm × 42 mm × 20 mm

Dimension Size Meaning
d 32 mm Shaft / bearing bore
D 42 mm Housing bore / outer diameter
B 20 mm Bearing width

The relatively small difference between the 32 mm bore and 42 mm outside diameter is one of the main reasons this bearing is used where radial space is limited.

The housing bore should be checked carefully before installation. For standard mounting dimensions, catalog data gives a housing bore range around 41.989–42.014 mm. (Nodes Bearing)

 

The Drawn Cup Design

 

TA3220 is different from a standard deep groove ball bearing.

The outer ring is made from a formed steel cup rather than a thick machined outer ring. Inside the cup are multiple small-diameter needle rollers.

This construction keeps the bearing relatively thin.

In practical terms, it means the designer can get a reasonable radial load capacity without taking up too much space around the shaft.

This is useful in compact mechanical assemblies where increasing the housing diameter is not an option.


⚙️ Why Needle Rollers Work Well in a Small Space

Needle rollers are long and relatively thin compared with ordinary bearing balls.

Because there are many rollers carrying the load, the bearing can support radial loads over a compact cross-section.

For equipment designers, this can help when:

The shaft diameter is already fixed.

There is limited radial space.

A larger outer bearing would not fit.

The bearing needs to sit inside a relatively small housing.

Weight and package size need to be kept under control.

TA3220 is therefore more about saving installation space than simply replacing a conventional ball bearing.

 

TA3220 vs a Standard Ball Bearing

 

If you are choosing between a needle roller bearing and a ball bearing with a similar bore, the main difference is the space available around the shaft.

Point TA3220 Standard Ball Bearing
Rolling Element Needle Roller Ball
Radial Space Compact Usually larger
Main Load Type Radial Radial + some axial
Cross Section Thin Generally thicker
Speed Suitable for many rotating applications Often better for high-speed use
Misalignment Limited Depends on bearing design
Axial Load Not the main purpose Depends on design

TA3220 should not be chosen simply because it has a high load rating. The machine's movement and load direction should be checked first.

 

 

 Installation Is More Important Than It Looks

A drawn cup bearing depends heavily on the surrounding parts.

The housing bore and shaft condition have a direct effect on how the rollers run.

Before installation, check:

Housing

The housing bore should be within the required tolerance and should not have dents or damage.

Shaft

The shaft surface should be smooth and free from deep scratches.

Alignment

The shaft and housing should be properly aligned. Needle rollers do not handle serious misalignment well.

Lubrication

The correct lubricant should reach the rolling elements before the bearing is put into normal operation.

For replacement work, these points are worth checking even when the new bearing has exactly the same model number as the old one.

 

Oil or Grease?

TA3220 can be used with oil or grease lubrication, depending on the machine design. (Hangzhou Changer Bearing Co., Ltd)

The better option depends on the working conditions.

Working Condition Possible Choice
General machinery Grease
Continuous rotation Oil may be considered
Higher speed Check lubricant and temperature carefully
Long maintenance interval Grease can be convenient
Gearbox application Match the gearbox oil

There is no single lubricant that works best for every machine.

For an OEM project, we recommend confirming the lubricant together with the operating speed and temperature.

 

 

Does TA3220 Include an Inner Ring?

 

The standard drawn-cup version does not necessarily include a separate inner ring.

This matters when replacing an existing bearing.

The shaft itself may act as the inner race when its surface and hardness are suitable. In other designs, a separate inner ring can be used.

For the TA3220 family, an IRT 2820 inner ring is listed as an associated component in catalog data. (Nodes Bearing)

If your existing assembly uses an inner ring, please confirm this before ordering the bearing alone.

 

Three Things to Confirm Before Buying

Before sending an RFQ for TA3220, I recommend confirming these three points:

① Is the shaft really 32 mm?

A small difference here can change the bearing selection.

② Is 42 mm the correct housing size?

The drawn cup needs a suitable housing bore. It is not enough to make the bearing fit the shaft.

③ Do you need an inner ring?

If the shaft surface is not suitable as a raceway, an inner ring may be required.

These three checks can prevent many replacement mistakes.

 

 

FAQ

1. What are the dimensions of TA3220?

The standard TA3220 size is 32 mm bore × 42 mm outside diameter × 20 mm width. (Nodes Bearing)

2. Is TA3220 a drawn cup needle roller bearing?

Yes. TA3220 belongs to the drawn-cup needle roller bearing family. The thin outer cup is formed from steel and contains needle rollers. (Hangzhou Changer Bearing Co., Ltd)

3. Does TA3220 have a 32 mm bore?

Yes. The nominal bore/shaft size is 32 mm.

4. Does TA3220 include an inner ring?

The standard drawn-cup bearing is normally supplied without a separate inner ring. An IRT 2820 inner ring is listed as a compatible assembled component. (Nodes Bearing)

5. What is the load rating of TA3220?

For the TA3220Z catalog version, the basic dynamic load rating is about 25.4 kN and the basic static load rating is about 38.6 kN. (Nodes Bearing)

6. What is the maximum speed of TA3220?

The published catalog data for TA3220Z lists an allowable rotational speed of approximately 11,000 rpm. Actual operating speed should be checked together with lubrication, load and temperature. (Scribd)

7. Can TA3220 run with grease?

Yes. The product page lists both oil and grease compatibility. (Hangzhou Changer Bearing Co., Ltd)

8. Can I use TA3220 for a gearbox?

It can be considered for gearbox and transmission applications where the bearing size, load, speed and lubrication conditions match the design.

9. What is the difference between TA3220 and TAM3220?

They are closely related drawn-cup needle bearing designs, but the exact cage/end configuration differs. For a replacement order, it is better to match the original designation rather than assuming the two are interchangeable. Catalog data lists TA3220Z and TAM3220 as related versions with the same 32 × 42 × 20 mm boundary size. (Scribd)

 

 

Hot Tags: High Precision Needle Roller Bearings TA3220, China High Precision Needle Roller Bearings TA3220 manufacturers, factory, adjustable linear bearing, sealed bearing, groove bearing, large steel ball bearings, sprocket bearing, small rollers with bearings

Send Inquiry