Lock Washer MB14 MB15 MB16 MB17

Lock Washer MB14 MB15 MB16 MB17
Product Introduction:
【Product Information】 Place of Origin:Zhejiang, China Brand Name:OEM Model Number:MB16 Standard:DIN Material of external teeth lock washer:Q235 steel Application external teeth lock washer:in adapter sleeve Teeth:external teeth lock washer Service of external teeth lock washer:OEM Service...
Send Inquiry
Description
Technical Parameters

Lock Washer MB14 for Bearing Lock Nut Assemblies

Secure the Lock Nut. Keep the Assembly in Position.

A reliable bearing assembly depends on more than the bearing itself. The locking components also need to perform as intended, particularly in applications exposed to vibration, rotating loads, or continuous operation.

The MB14 lock washer is designed for use with compatible KM-series lock nuts, helping prevent the nut from loosening during operation. Its internal tab engages with the corresponding shaft or sleeve feature, while one of the outer tabs can be bent against the lock nut to provide mechanical locking.

For bearing distributors, maintenance suppliers, and industrial equipment manufacturers, MB14 offers a practical solution for securing compatible bearing mounting arrangements. It is a small component, but correct selection and installation are essential to the reliability of the complete assembly.

 

Product Specifications

Item Specification
Product Name Lock Washer MB14
Part Number MB14
Product Type Locking Washer for Bearing Lock Nuts
Compatible Lock Nut KM14, subject to assembly verification
Typical Application Bearing lock nut assemblies
Material Carbon steel or other specified material
Surface Treatment Available according to order requirements
Design Internal locating tab and external locking tabs
Supply Options Standard parts and bulk orders
Customization Subject to drawing and quantity requirements

Note: Material, surface finish, dimensional tolerances, and compatibility should be confirmed against the supplier's technical drawing before ordering. The specifications above are a purchasing reference, not a substitute for a verified product drawing.

 

How the MB14 Locking Washer Works

The MB14 is a mechanical locking component rather than a load-bearing element. Its purpose is to help maintain the position of a compatible lock nut after adjustment.

During installation, the washer's inner tab fits into the corresponding slot or keyway on the shaft or adapter sleeve. The lock nut is then tightened to the specified installation setting. Once the nut is correctly positioned, a suitable outer tab is bent against a nut face or slot to resist unintended rotation.

This arrangement provides a direct mechanical locking method without relying solely on friction.

For best results, the washer must match the locking nut and mounting arrangement. The locking tab should be bent securely without cracking or damaging the washer. A previously bent tab should not automatically be reused, as repeated deformation can reduce its reliability.

 

Why MB14 Matters in Bearing Mounting

Mechanical retention: The locking tab helps prevent the lock nut from rotating out of its adjusted position.

Compact installation: Its thin profile makes it suitable for bearing assemblies where axial space is limited.

Straightforward maintenance: The locking arrangement can be inspected during routine servicing, allowing maintenance personnel to check whether the nut remains secured.

Practical replacement: MB14 can be included in bearing maintenance kits and replacement-part inventories alongside compatible lock nuts and bearings.

These benefits depend on correct sizing, proper installation, and the condition of the locking washer. The washer does not compensate for an incorrectly tightened lock nut or a damaged shaft thread.

 

Where Is MB14 Commonly Used?

MB14 locking washers are typically specified in mechanical assemblies that use compatible lock nuts to secure bearings or related components.

Typical applications include:

Bearing mounting systems: Securing compatible lock nuts on adapter sleeves or shafts.

Industrial gearboxes: Supporting bearing retention arrangements where a lock nut and washer are specified.

Electric motors and rotating equipment: Used in suitable bearing assemblies requiring mechanical nut locking.

Maintenance and repair operations: Replacing worn, damaged, or previously deformed locking washers during equipment servicing.

The exact application depends on the shaft arrangement, lock nut specification, and equipment manufacturer's assembly instructions.

 

FAQ

 

1. What is an MB14 lock washer used for?

MB14 is a locking washer used with a compatible lock nut to help prevent unintended loosening. It is commonly associated with bearing mounting and retention assemblies.

2. Is MB14 compatible with KM14 lock nuts?

MB14 is commonly specified with KM14 lock nuts. However, buyers should verify the relevant standard, dimensions, and mounting arrangement before placing an order, particularly when replacing parts from different manufacturers.

3. Can an MB14 lock washer be reused?

Replacement is generally recommended once a locking tab has been bent and then straightened during disassembly. Repeated bending can weaken the tab and reduce its ability to secure the lock nut.

4. What material is used for MB14?

The material depends on the manufacturer's specification. Carbon steel is a common option for this type of component, while other materials or finishes may be available for particular operating environments. Confirm the material and corrosion-protection requirements before ordering.

5. Does the MB14 washer carry the bearing load?

No. Its primary function is to lock the nut mechanically. Bearing loads are supported by the bearing and the surrounding mounting components, as defined by the assembly design.

6. Can I order MB14 lock washers in bulk?

Yes. MB14 can be sourced for wholesale, maintenance, and OEM purchasing, subject to supplier stock and production arrangements. For repeat orders, confirming the drawing, material, packaging, and inspection requirements helps maintain consistency between batches.

 

Product Picture

 

Lock-Washer-MB14-MB15-MB16-MB17.jpg

 

Hot Tags: lock washer mb14 mb15 mb16 mb17, China lock washer mb14 mb15 mb16 mb17 manufacturers, factory, Washer

Send Inquiry