Lock Washer

Lock Washer
Product Introduction:
Bearing lock washer in adapter sleeve bearing MB6 M30X1.5 MB7 MB8
Send Inquiry
Description
Technical Parameters

Lock Washer

Spring and Tooth Lock Washer for Preventing Fastener Loosening Under Vibration

For machinery designers and maintenance engineers, lock washer selection is often determined by the required vibration resistance, fastener size, and operating environment as much as by dimensional compatibility.

When equipment requires prevention of fastener loosening under dynamic loads, lock washers provide a practical solution for maintaining joint integrity in industrial and mechanical assemblies.

The lock washer is a type of washer designed to prevent fasteners from loosening due to vibration and dynamic loads. It achieves this through spring action or tooth engagement, creating resistance against unscrewing rotation. Available in spring lock washer (split helical) and tooth lock washer (internal/external) types, with materials including carbon steel, stainless steel 304, and stainless steel 316. Conforms to DIN 127, ANSI/ASME B18.21.1, and GB/T 94.1 standards.

For industrial distributors, OEM manufacturers, and maintenance suppliers, lock washers offer a standardized fastening component that simplifies assembly and improves joint reliability in vibrating applications.


 

Understanding the Lock Washer Structure

Unlike plain washers that primarily distribute load and protect surfaces, lock washers are engineered specifically to prevent fastener loosening through mechanical resistance against rotation.

The spring action or tooth engagement creates a wedging effect between the fastener and the mating surface, counteracting the tendency of the fastener to rotate under vibration.

Component Function
Split Gap / Helical Cut Creates spring action that resists compression and provides continuous tension
Sharp Edges / Tang Ends Bite into the fastener and mating surface to resist rotation
Tooth Elements (Tooth Type) Bent teeth engage with the fastener and mating surface to prevent loosening
Spring Steel Body Provides elastic deformation and recovery for continuous locking force
Corrosion-Resistant Finish Zinc plating, black oxide, or stainless steel construction for environmental protection

This structure makes lock washers suitable for equipment where vibration resistance, joint reliability, and easy installation are important considerations.


 

Lock Washer Product Specifications

 

Item Specification
Product Name Lock Washer
Product Type Spring Lock Washer / Tooth Lock Washer
Standards DIN 127, ANSI/ASME B18.21.1, GB/T 94.1, JIS B 1251
Material Options Carbon Steel, Stainless Steel 304, Stainless Steel 316
Surface Treatment Zinc Plated, Black Oxide, Plain (Stainless)
Size Range (Metric) M2 – M48
Size Range (Inch) #2 – 2"
Hardness (Spring Steel) HRC 40-50 / HV 430-530
Type (DIN 127) Form A (tang ends) / Form B (flat ends)
Configuration Split Helical / Internal Tooth / External Tooth / Internal & External Tooth
Customization Available by Drawing or Sample

 

Lock Washer Types

Lock washers are available in several configurations to suit different vibration and space requirements.

Type Description Typical Use
Spring Lock Washer (Split Helical) Helical spring washer with a split gap that creates spring action and sharp edges that bite into mating surfaces General industrial applications with vibration
Internal Tooth Lock Washer Teeth on the internal diameter that engage the fastener; teeth do not project beyond the fastener head Applications where projection of teeth beyond the head or nut is objectionable
External Tooth Lock Washer Teeth on the external diameter that engage the mating surface; provides higher torque resistance Electrical grounding and applications requiring higher holding force
Internal & External Tooth Lock Washer Teeth on both internal and external diameters for maximum locking effect Applications requiring maximum resistance to loosening

The correct choice depends mainly on the required locking force, available space around the fastener, and the surface conditions.


 

Why Buyers Choose Lock Washers Instead of Other Locking Methods

The choice between different locking methods usually depends on the required reliability and installation conditions.

Application Requirement Recommended Structure
General vibration resistance Spring lock washer (split helical)
Higher locking force in confined space Internal tooth lock washer
Electrical grounding application External tooth lock washer
Maximum resistance to loosening Internal and external tooth lock washer
Precise preload control required Thread locking adhesive or nylon insert nut

Lock washers are especially suitable when a simple, reusable locking method is preferred for accessible fasteners.


 

Installation Advantages for Machine Builders

For OEM equipment manufacturers, installation efficiency and fastening reliability can influence overall production time.

Lock washers provide several practical design benefits:

Design Consideration Lock Washer Advantage
Vibration resistance Spring action or tooth engagement resists unscrewing rotation
Simple installation No special tools or procedures required; installs with standard fasteners
Reusability Can be reused in many applications after inspection
Cost-effective Low-cost locking solution compared to alternative locking methods
Wide availability Standard sizes available in metric and inch dimensions
Corrosion protection Available in stainless steel or plated finishes for various environments

The standardized design allows engineers to integrate lock washers into various machine designs without requiring special tools or procedures.


 

Key Dimensions Buyers Should Confirm Before Ordering

Incorrect dimension matching is one of the most common causes of fastening problems.

Before purchase, buyers should verify:

Confirmation Item Reason
Nominal Size (d) Match fastener thread size (M3, M4, M5, etc.)
Inner Diameter (d1) Ensure clearance for the fastener shank
Outer Diameter (d2) Confirm installation space and contact area
Thickness (s) Check stack-up height and spring compression
Standard DIN 127, ANSI/ASME B18.21.1, or GB/T 94.1
Material Carbon steel, stainless steel 304, or 316 per environment
Type Spring, internal tooth, external tooth, or combination

For replacement projects, comparing the existing washer with the specified dimensions is recommended.


 

Lock Washers Compared With Similar Fastening Components

Different fastening components serve different equipment requirements.

Component Design Feature Typical Use
Spring Lock Washer Split helical spring action General vibration resistance
Tooth Lock Washer Bent teeth for engagement Higher locking force, electrical grounding
Plain Washer Flat surface, no locking feature Load distribution, surface protection
Nylon Insert Lock Nut Nylon insert creates friction Reusable locking without washer
Thread Locking Adhesive Chemical bonding Permanent or semi-permanent locking

The correct choice depends mainly on the required locking force, reusability, and installation conditions.


 

Applications Where Lock Washers Are Commonly Selected

Lock washers are used in many industrial and mechanical applications requiring reliable fastening under vibration.

Equipment Type Application
Automotive Engine components, suspension systems, chassis fasteners
Industrial Machinery Vibration-prone equipment, rotating machinery
Electrical Equipment Grounding connections, terminal fasteners
Construction Equipment Heavy-duty fastening under dynamic loads
Agricultural Machinery Equipment exposed to vibration and shock loads
Home Appliances Vibration-resistant fastening in motors and moving parts

The final washer selection should always consider vibration level, temperature, environment, and maintenance requirements.


 

Customization & OEM Services

For buyers requiring specific lock washer configurations, customization options are available.

Customization Area Available Options
Material Carbon steel, stainless steel 304, stainless steel 316, alloy steel
Size Metric M2-M48, inch #2-2", custom sizes from drawings
Type Spring, internal tooth, external tooth, internal & external tooth
Surface Treatment Zinc plated, black oxide, plain (stainless), hot-dip galvanized
OEM Packaging Customized packaging and labeling available for qualified orders

 

Manufacturing Process & Quality Control

Lock washers are manufactured through a controlled process to ensure consistent quality and performance.

Process Stage Description
Material Selection Spring steel, carbon steel, or stainless steel selected according to specification
Stamping / Forming Washers stamped or formed to required dimensions and configuration
Heat Treatment Controlled heat treatment for hardness and spring properties
Surface Treatment Zinc plating, black oxide, or passivation applied as specified
Quality Inspection Dimensional, hardness, and surface quality verified

Quality Control: Dimensional inspection verifies inner diameter, outer diameter, and thickness against approved specifications. Hardness testing confirms the specified hardness range for spring properties. Surface inspection examines finish quality and visible defects. Spring performance is verified through compression testing where applicable.

Quality documentation includes ISO 9001 certification. Material certifications are available upon request.


 

FAQ

What is a lock washer?

A lock washer is a type of washer designed to prevent fasteners from loosening due to vibration and dynamic loads. It achieves this through spring action or tooth engagement, creating resistance against unscrewing rotation.


What is the difference between a spring lock washer and a tooth lock washer?

A spring lock washer uses a split helical design with spring action and sharp edges that bite into mating surfaces. A tooth lock washer uses bent teeth on the internal or external diameter to engage the fastener and mating surface.


What standards do lock washers conform to?

Lock washers conform to DIN 127, ANSI/ASME B18.21.1, GB/T 94.1, and JIS B 1251 standards.


What materials are lock washers available in?

Lock washers are available in carbon steel, stainless steel 304, and stainless steel 316. Surface treatments include zinc plating, black oxide, and plain (stainless).


What is the size range available?

Metric sizes range from M2 to M48. Inch sizes range from #2 to 2".


What is the difference between DIN 127 Form A and Form B?

DIN 127 Form A has tang ends (the ends of the split are bent outward). DIN 127 Form B has flat ends (the ends of the split are parallel).


Can lock washers be reused?

Lock washers can be reused in many applications if they are inspected for damage and spring properties are retained. However, for critical applications, replacement is recommended.


Can lock washers be customized?

Yes. Material, size, type, and surface treatment can be customized according to drawings or samples.


What information is needed for quotation?

Buyers should provide required size, type, material, surface treatment, standard, quantity, and any special specifications.


Lock Washers for Reliable Fastening Solutions

When mechanical design requires prevention of fastener loosening under vibration, lock washers provide a practical solution for maintaining joint integrity in industrial and mechanical assemblies.

Lock washers combine spring action or tooth engagement with standardized dimensions, making them suitable for automotive, industrial machinery, electrical equipment, construction equipment, and OEM applications.

For global distributors and machinery manufacturers, reliable quality, consistent supply, and flexible purchasing options are key factors in long-term cooperation.

 

product-1-1

 

 

 

 

Hot Tags: lock washer, China lock washer manufacturers, factory, Washer

Send Inquiry